This kit will allow you to lower the temperatures of your 550 motors by running large cooling fans over large heatsinks that draw heat away from the core of your motors. The kit is very easy to install and does not require an additional battery pack. Keep the torque sleeves on the motors with this kit too! Will run on 12 to 24 volts and reduces car run times by about 2 minutes. No soldering or cutting wires required. Works on all brands of ride-ons.
Works well! Motors don't get hot anymore just "warm to the touch". Make sure to use a meter to verify correct polarity when wiring, otherwise you'll damage the power unit.
T
Travis Mullen
Must Have for Motors
Fans are perfect for the motors. Easy to install. I have them wired to run when the pedal is pushed. Make sure on the splice connectors you squeeze the metal until it is flush with the plastic.
R
RN
Fan it
Works good, easy set up.
M
Michael Miller
24v f-150 new stock motors
So with your dual 750 motors pinions and metal first gear grease and brake reduction is plenty fast and works great in low speed. I know it voids the warranty but I'm very satisfied with all the products. The cooling fans were not needed on your product as they do not overheat at all with the heat sinks. But I was able to utilize the fans on a F-150 with 24 volts and it did the trick on stock motors to keep them from overheating too much.
C
Christopher Lee
Easy to install
Easy install on the bronco upgrade. Hoping it will extend the motor life.