Stage III Speed Motors for Dynacraft 24v UTV

This is the Stage III Performance Motor kit for all Dynacraft RealTree 24v UTVs. The Stage III motors give the UTV the speed and off-road power the punch this large car really needs. These motors will provide 4x more offroad power plus a noticeable speed boost. Kit includes:
- 2 Modified Performance 775 motors - The fastest 775 motors designed for ride-ons today
- 10 tooth Hardened Steel pinion gears
- Torque sleeves on both motors for more low end power.
- Internal cooling fans in the motors
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.
- 550 to 775 Universal Motor Mount Kit

To install this kit you will need to trim the plastic ring off of the gearbox housing that encompasses the stock motor as shown in the picture. You will also need to trim a little of the body where the motor slides into the car. Very easy to do.
Some kits are coming with a low amperage self-resetting breaker that you will need to replace with a 40 amp breaker (linked below).

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Required for assembly: threadlock to secure the pinion gears and motor mount screws to the motors. 1.5mm Allen Key to secure pinion gears.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Installation Videos are in the Product Pictures.